Describe a ripple tank edge diffraction experiment
Observe bending beyond the end of a barrier and distinguish an edge from a two-sided gap.
Section P3.1 · General properties of waves
Mapped to the named 0654 section using teaching from the corresponding single-science course. A 0654-specific review of every Core and Supplement objective is still in progress. Written practice is self-checked; it does not demonstrate supervised laboratory competence or award an official Cambridge grade.
Before you begin
- Recognise diffraction as wave spreading.
- Distinguish a barrier end from an opening between two barriers.
Work on paper. Try each question before revealing help, and explain why your method works.
Quick readiness check
Which layout specifically shows a single-edge method?
What you will learn
- Describe a ripple-tank method showing diffraction at an edge.
- Identify wavefront extension into the geometric shadow region.
Use the end of one barrier
In a teacher-supervised tank, send suitable straight water wavefronts toward one barrier whose end lies within the observation region. One part of the incoming field continues past the open side, while fronts bend around the barrier end and extend into a region a simple straight-path construction would leave shaded. Illuminate and view the pattern with the source and water conditions controlled.
A single edge differs from a gap bounded by two barrier ends. Label the incident direction, barrier, its end and the geometric shadow: the shadow is a ray-model prediction used for comparison, not proof that absolutely no wave can enter it. The observed extension around the end supports edge diffraction.
Read the front curvature and its limits
Observe the transmitted front portions and their curved extensions near the edge without confusing unrelated tank-boundary returns with the intended effect. Keep source frequency, suitable depth and viewing conditions steady for an initial described experiment. The Core objective includes this edge observation even though systematic wavelength-effect comparison is a separate Supplement objective.
The sketch gives qualitative geometry, not exact energy in the shadow, a universal curve radius or a newly performed measurement. Suitable repeated observations and scale interpretation would be needed for numerical evidence. A written answer can describe the method and conclusion but cannot certify practical competence or completion of an assessed practical route.
Sources for this lesson
Pause and explain
What does entry into a geometric shadow region demonstrate here?
Worked example
A supplied straight-front pattern reaches a single barrier end and curved extensions appear in its geometric shadow. Name the effect and evidence.
Show the worked solution
- Identify the single exposed barrier edge.
- The emerging fronts bend beyond the simple straight continuation.
- Their extension into the shadow supports edge diffraction.
Answer Edge diffraction: curved fronts extend into the geometric shadow.
Try a topic test
Choose Easy, Normal or Difficult. Save your answers and open worked review after finishing.
Test this topic →From guided practice to a new situation
Write your answer and reasoning first. Use a hint only if you are stuck. The model solution is for self-checking; your written work is not automatically marked.
Describe a ripple-tank single-edge experiment and the relevant observation.
Give me a hint
Use one barrier end and identify the region beyond its straight-path shadow.
Compare my reasoning
- Send approximately straight fronts toward a suitable single barrier end.
- Observe the front portions passing the open side and curving around the end.
- Extension into the geometric shadow supports edge diffraction.
A controlled single-edge view shows fronts bending into the geometric shadow.
Look for these in your work
- Describe the end geometry.
- Identify the observed extension.
Contrast the barrier layout for gap and edge experiments.
Give me a hint
Count the relevant exposed barrier ends.
Compare my reasoning
- A gap has two barrier pieces bounding an opening.
- An edge method uses one exposed end beside an open region.
- Both investigate spreading, but their layouts differ.
Gap: two-sided opening; edge: one exposed barrier end.
Look for these in your work
- Distinguish apparatus geometry.
- Retain the common wave effect.
A picture shows curved fronts near a barrier end but also strong tank-edge returns. What further evidence is needed?
Give me a hint
Isolate the intended edge-generated pattern.
Compare my reasoning
- Unrelated reflections may overlap the view.
- Use suitable timing and controlled observation to separate them.
- Only then attribute the extension to the intended edge method; a sketch is not practical certification.
A controlled view separating the intended edge spread from unrelated returning waves.
Look for these in your work
- Identify the confound.
- Limit the practical claim.
Common mistakes
- An edge experiment needs one exposed barrier end.
- A geometric shadow is a straight-path prediction, not a guaranteed zero field.
- Core includes edge observations; wavelength comparisons are Extended.
What can you explain now?
Must a gap between two barrier pieces exist to describe diffraction at one edge?
Compare with the explanation
No.
One exposed barrier end can produce the described edge-spreading pattern.
After trying it yourself, choose your next review. This is your self-assessment.
Your review choice appears on Today. Sign in to sync it across devices.
Make it stick
Describe single-edge apparatus and compare observed wave entry with the geometric shadow prediction.
If you needed the solution, close it and solve the problem again from a blank page. A correct answer is stronger when you can explain the reason for each step.