Explain infrared heating sensing and short-range links
Connect grills, remotes, intruder alarms, thermal imaging and optical fibres to infrared emission and detection.
Section P3.3 · Electromagnetic spectrum
Mapped to the named 0654 section using teaching from the corresponding single-science course. A 0654-specific review of every Core and Supplement objective is still in progress. Written practice is self-checked; it does not demonstrate supervised laboratory competence or award an official Cambridge grade.
Before you begin
- Locate the region in the electromagnetic spectrum.
- Distinguish a carrier from an output signal.
Work on paper. Try each question before revealing help, and explain why your method works.
Quick readiness check
What travels between the electromagnetic source and detector?
What you will learn
- Explain the listed infrared applications.
- Connect each apparatus to energy transfer or information detection.
Heating and short-range information
An electric grill emits infrared radiation that food absorbs, transferring energy by radiation as well as any other present mechanisms. Infrared does not need visible glow to be emitted. A television remote instead uses a controlled infrared signal to represent commands received by a sensor.
Remote-control links are short-range and commonly require a suitable optical path. Infrared information is not audible sound, and a blocked or misaligned path may prevent reception. The low-power signalling arrangement differs from a heater even though both use infrared.
Detect and guide infrared
A thermal camera detects infrared from objects and forms an image of the measured pattern. Some intruder alarms detect changes in received infrared when a person moves; other designs detect an interrupted beam. The detector arrangement must be specified rather than assuming every alarm works identically.
Suitable optical fibres transmit selected infrared wavelengths, guiding the signal along a cable. Glass is not transparent to every infrared wavelength, so identify a suitable band. Thermal imaging, sensing and communications use detection or guidance, rather than treating infrared as visible light to an unaided eye.
Sources for this lesson
Pause and explain
Which apparatus detects an infrared pattern from objects to form an image?
Worked example
Match infrared to an electric grill, television remote, thermal camera and fibre link.
Show the worked solution
- A grill transfers absorbed radiant energy.
- A remote sends commands and a camera detects infrared patterns.
- A suitable fibre guides selected infrared information signals.
Answer Heating; short-range commands; thermal imaging; guided cable communication.
Try a topic test
Choose Easy, Normal or Difficult. Save your answers and open worked review after finishing.
Test this topic →From guided practice to a new situation
Write your answer and reasoning first. Use a hint only if you are stuck. The model solution is for self-checking; your written work is not automatically marked.
Explain how infrared from an electric grill can heat food.
Give me a hint
Follow emission, travel and absorption.
Compare my reasoning
- The grill emits infrared.
- Radiation reaches the food.
- Absorption transfers energy into the food.
Absorbed infrared transfers energy to the food.
Look for these in your work
- Include absorption.
- Do not require visible glow.
Compare an infrared remote and an infrared intruder alarm.
Give me a hint
Distinguish an intentional command source from a sensing arrangement.
Compare my reasoning
- A remote sends encoded commands.
- An alarm detects a change or interrupted beam, depending on design.
- Both involve infrared detection but serve different purposes.
A remote communicates commands; an alarm senses a specified change.
Look for these in your work
- Name both uses.
- State the alarm arrangement.
Why is 'glass carries every infrared wavelength' too strong for an optical fibre?
Give me a hint
Check the material's selected transmission band.
Compare my reasoning
- Fibres use suitable visible or infrared signals.
- Transmission depends on wavelength and material.
- Some infrared is absorbed rather than transmitted efficiently.
Only suitable transmission bands should be claimed.
Look for these in your work
- Mention fibres as a use.
- Retain the wavelength-dependent material limit.
Common mistakes
- Name both the region and its specific use.
- Explain the physical role rather than only naming apparatus.
- The listed application does not remove apparatus or exposure limits.
What can you explain now?
Are all infrared applications identical processes?
Compare with the explanation
No.
The source, interaction and receiver determine whether energy or information is being used.
After trying it yourself, choose your next review. This is your self-assessment.
Your review choice appears on Today. Sign in to sync it across devices.
Make it stick
Explain all five infrared uses and distinguish heating, sensing and information transfer.
If you needed the solution, close it and solve the problem again from a blank page. A correct answer is stronger when you can explain the reason for each step.