Classify typical conductors and insulators without confusing magnetism
Use copper, aluminium and other metals as ordinary conductor examples, and dry glass, plastic and rubber as ordinary insulators.
Exam scope and assessment notes
Core and Extended · Physics 0972, 2026–2028. Follow the selected magnetism or charge section. Field lines are explanatory models, not material threads or measured force values. Written practice is self-checked. Human subject-teacher review, supervised practical competence and cumulative assessment remain pending. Cambridge states that IGCSE 0972 has the same subject content as IGCSE 0625, with 9–1 grading. This StudyForA pathway maps the 2026–2028 syllabus only. This 9–1 graded qualification is available only in a limited number of administrative zones. Confirm that your centre can enter you for this code and exam series with Cambridge International. Cambridge has published a separate syllabus for 2029. StudyForA has not reconciled that version yet; this page supports exams in 2026, 2027 and 2028 only.
Before you begin
- Explain mobile and bound electrons.
- Recognise a controlled sample test.
Work on paper. Try each question before revealing help, and explain why your method works.
Quick readiness check
Which model feature supports ordinary metallic conduction?
What you will learn
- Recall representative conducting and insulating solids.
- Keep electrical conduction, magnetic response and test conditions separate.
Connect examples to the electron model
Copper and aluminium are familiar electrical conductors, as are iron and other ordinary metals. Their useful mobile electrons distinguish them from dry plastic, glass and rubber, which are familiar electrical insulators in the school model. Conducting does not require a sample to be positively or negatively charged overall.
A copper wire with an intact plastic covering combines a conducting core with an insulating exterior. The covering restricts unintended contact paths; it does not turn the copper itself into an insulator. Classify the actual region and path tested rather than assigning one material property to an entire composite object.
Separate classification from assumptions
Magnetic attraction is a different test. Iron is ordinarily both conducting and magnetic, while copper and aluminium conduct without ordinary strong attraction to a magnet. A magnet cannot replace the electrical sample circuit when deciding conductivity.
The familiar insulating examples assume ordinary dry conditions. Damp wood or wet surfaces may provide conducting paths, and an insulating coating may block contact to a conducting core. For an unknown sample, check composition, contacts and controlled evidence. Do not generalise from shininess or the word 'solid'.
Pause and explain
Which pair gives typical dry electrical insulators?
Worked example
A copper wire covered in dry plastic is tested at its exposed ends and then on its intact covering. Explain the difference.
Show the worked solution
- Exposed end contacts connect through conducting copper.
- Contacts on intact dry plastic do not access that core path.
- The same composite object contains regions with different properties.
Answer Copper core conducts; intact dry plastic covering insulates the tested exterior path.
Try a topic test
Choose Easy, Normal or Difficult. Save your answers and open worked review after finishing.
Test this topic →From guided practice to a new situation
Write your answer and reasoning first. Use a hint only if you are stuck. The model solution is for self-checking; your written work is not automatically marked.
Name two ordinary metal conductors and two dry solid insulators.
Give me a hint
Use representative materials and keep the dry condition attached to the insulating examples.
Compare my reasoning
- Copper and aluminium are ordinary conductors.
- Dry glass and plastic are ordinary insulators.
- The classification concerns electrical charge movement.
Conductors: copper and aluminium; dry insulators: glass and plastic.
Look for these in your work
- Include both categories.
- Keep magnetism as a separate property.
Classify iron and copper for conduction and ordinary strong magnetic attraction.
Give me a hint
Make two separate decisions for each metal.
Compare my reasoning
- Both iron and copper conduct electricity.
- Iron is ordinarily magnetic.
- Copper is non-magnetic in the school strong-attraction classification.
Both conduct; iron magnetic, copper non-magnetic in this school classification.
Look for these in your work
- Name both properties.
- Do not equate conductor with magnet.
A sample with a metal core and insulating coating gives a dark indicator when clips touch only the coating. Does this prove the core is insulating?
Give me a hint
Identify which region the contacts actually connect through.
Compare my reasoning
- The clips test the coating path.
- The coating can isolate the metal core from them.
- The result does not establish the core's conductivity.
No; the tested coating can prevent contact to a conducting metal core.
Look for these in your work
- Identify the actual tested path.
- Request suitable core-contact evidence before classifying it.
Common mistakes
- Specify the material and tested path.
- Non-magnetic metals can conduct.
- Dry conditions and coatings affect the observed result.
What can you explain now?
Can a metal be conducting but non-magnetic in the school classification?
Compare with the explanation
Yes; copper is an example.
Carrier mobility and ordinary magnetic attraction describe different physical properties.
After trying it yourself, choose your next review. This is your self-assessment.
Your review choice appears on Today. Sign in to sync it across devices.
Make it stick
Recall typical solid examples and distinguish electrical, magnetic and composite-path classifications.
If you needed the solution, close it and solve the problem again from a blank page. A correct answer is stronger when you can explain the reason for each step.