Describe a ripple tank gap diffraction experiment
Show spreading beyond an opening and distinguish the gap from the blocked barrier sections.
Mapped to the named 0654 section using teaching from the corresponding single-science course. A 0654-specific review of every Core and Supplement objective is still in progress. Written practice is self-checked; it does not demonstrate supervised laboratory competence or award an official Cambridge grade.
Before you begin
- Describe narrow-gap diffraction.
- Recognise a suitable straight-front source.
Work on paper. Try each question before revealing help, and explain why your method works.
Quick readiness check
Which layout matches the gap experiment?
What you will learn
- Describe apparatus and observations for gap diffraction in a ripple tank.
- State the source, depth and geometry controls for a clear comparison.
Leave a real opening in a two-part barrier
Use a teacher-supervised ripple tank with approximately straight incident wavefronts from a vibrating bar. Place two appropriate barrier pieces across their path with a suitable gap between them. Use illumination and a screen to see fronts approach the gap and spread beyond it. Keep water depth the same in the intended incident and transmitted regions so a depth-boundary effect is not mistaken for the gap effect.
The visible opening distinguishes this from a continuous plane reflector. Observe the curved fronts extending into sideways regions beyond the opening's simple straight continuation. Label incident fronts, barrier parts, gap and emerging fronts rather than drawing an unexplained set of circles with no connection to the apparatus.
Control the view and qualify the interpretation
Keep source rate and suitable amplitude steady, and avoid unrelated tank-edge returns or currents in the observation region. A simple narrow-gap observation is evidence of diffraction. A further systematic comparison must state which source wavelength and gap size are held or changed; the Extended lesson makes those comparisons explicit.
The projected pattern is a qualitative geometry view unless suitable scales and measurements are supplied. Curvature is not a calibrated transmitted-energy percentage, and a faint view is not automatically absence of diffraction. Written apparatus planning and picture interpretation do not demonstrate the student's practical setup, measurement skill or supervised competence.
Sources for this lesson
Pause and explain
What observation supports gap diffraction in the described view?
Worked example
A supplied tank view has straight incident fronts, two barrier pieces with an opening and curved fronts beyond it. Identify the wave effect.
Show the worked solution
- The disturbance passes through the actual gap.
- The transmitted pattern spreads sideways.
- That observation supports gap diffraction, not a depth-change explanation by itself.
Answer Gap diffraction shown by spreading fronts beyond the opening.
Try a topic test
Choose Easy, Normal or Difficult. Save your answers and open worked review after finishing.
Test this topic →From guided practice to a new situation
Write your answer and reasoning first. Use a hint only if you are stuck. The model solution is for self-checking; your written work is not automatically marked.
Describe a gap-diffraction tank layout and the expected observation.
Give me a hint
Name the straight source, two barrier pieces and transmitted region.
Compare my reasoning
- Produce straight incident waves in a teacher-supervised tank.
- Leave a suitable opening between two barrier pieces.
- Observe spreading curved fronts beyond the opening.
A two-part barrier with a gap produces an observable spreading transmitted pattern.
Look for these in your work
- Specify the opening.
- Describe the wavefront change.
Name three controls for comparing a supplied gap observation under unchanged propagation conditions.
Give me a hint
Keep the source, depth and unrelated disturbances appropriate.
Compare my reasoning
- Keep source frequency and suitable source amplitude steady.
- Keep the intended water depth matched.
- Control currents, unrelated returns and viewing conditions.
Steady source, matched depth and controlled flow/reflections/viewing.
Look for these in your work
- Name relevant controls.
- Link them to interpretation.
After narrowing a gap, a faint transmitted pattern is hard to see. Does faintness alone prove no diffraction?
Give me a hint
Visibility and wave geometry are different evidence.
Compare my reasoning
- A faint pattern may reflect less transmitted amplitude or viewing limitations.
- No calibrated absence criterion is supplied.
- Use a suitable controlled observation of front geometry before making the claim.
No; improve controlled observation before inferring absence of diffraction.
Look for these in your work
- Separate visibility from geometry.
- Avoid an unsupported absence claim.
Common mistakes
- Show the two barrier parts and opening.
- Keep intended water depth and source controls explicit.
- Brightness alone does not measure transmission energy.
What can you explain now?
Can a continuous solid barrier with no opening demonstrate this gap method as drawn?
Compare with the explanation
No.
The described transmitted-gap path requires an actual opening.
After trying it yourself, choose your next review. This is your self-assessment.
Your review choice appears on Today. Sign in to sync it across devices.
Make it stick
Describe a tank gap method with actual barrier geometry, expected spread and suitable controls.
If you needed the solution, close it and solve the problem again from a blank page. A correct answer is stronger when you can explain the reason for each step.